 |
 |
Photo Etched Lapel Pins - an image of your design is transferred from a photographic negative onto the surface of the metal. Your design is then etched into the brass using an acid-reaction process. All the acids and other impurities are carefully rinsed off. The indentations are then filled with the enamel colors. Colors are inserted by hand, one at a time, using different sized syringes. The sheet of metal is then fired at 450°F for 12 to 15 minutes. Pins are then cut out of the sheet according to your custom design. Non-colored (raised) sections of the pin are then plated to a shiny gold finish. An optional epoxy protective coating (dome) can then be applied to protect the color enamels from fading or cracking over time.
|
100 |
200 |
300 |
500 |
750 |
1000 |
2000 |
3000 |
5000 |
| 3/4" |
$1.81 |
$1.66 |
$1.52 |
$1.28 |
$1.21 |
$1.15 |
$1.02 |
$0.86 |
$0.75 |
| 1" |
$2.24 |
$1.93 |
$1.62 |
$1.33 |
$1.25 |
$1.18 |
$1.05 |
$0.89 |
$0.79 |
| 1.25" |
$2.30 |
$2.01 |
$1.72 |
$1.39 |
$1.30 |
$1.22 |
$1.10 |
$0.94 |
$0.84 |
|
 |
 |
